1 Outdoor Patio Heater Instruction Manual Model# PH08-SB & PH08-SSB Item # 61220, 61221
10 10. Locate the Mesh Guards (8)--8 pieces/4 sets. There will be 4 pieces that are narrow and 4 pieces that are wider (Fig A). Begin with the wid
11 13. The heater is now assembled and ready for leak testing and use. 14. The LPG tank is sold separately. Use a standard 20
12 A minimum supply pressure of .5 psi is required for the purpose of input adjustment of propane gas. Storage of an appliance indoors is permi
13 3. If leak is detected at regulator/cylinder valve connection, disconnect, reconnect, and perform another leak test. If you continue to see bubb
14 When Heater is ON: 1. Never use the heater while it is raining. The glass tube will break when it comes in contact with water. 2. Neve
15 19. Any guard or other protective device removed for servicing the heater must be replaced prior to operating the heater. 20. Installation and r
16 If you have any questions regarding this product, please call our customer service hotline at 1-866-985-7877, 9a.m. – 6 p.m. (EST), Monday – Fri
17 For questions regarding this product or to purchase replacement parts, please call our customer service hotline at 1-866-985-7877, 9a.m. – 6 p.
18 1 YEAR LIMITED WARRANTY – Customers in the Continental US All components are warranted for a period of 1 year after date
2 Table of Contents…………………………………...Page 2 Before You Begin...Page 2 S
3 SAFETY INFORMATION
4 SAFETY INFORMATION
5 PACKAGE CONTENTS
6 PREPARATION Before beginning assembly of this appliance, make sure all parts are present. Compare
7 1. Locate the Tank Housing Assembly (1). Open the front panel and remove the cartons containing all parts needed for assembly. Note: Each carto
8 4. Locate the Aluminum Tubes (4). Remove 8 pieces/4 sets of tubes. There will be 4 pieces of tubes that have a rod protruding from one end and 4
9 7. Locate the Reflector (5). Lean the heater slightly over and attach the Reflector to the Damper using 3 – M3x16 (C) screws. 8.
Comments to this Manuals